documentation continued

This commit is contained in:
Pierre Lecomte committed 2023-05-24 15:36:06 +02:00
1 parent 7600c13ae0
commit 2f66ac2eff
3 files changed
+42 -19

No files matched your search

+19 -8
View File
@@ -1,6 +1,15 @@
/*
* Open SMA design for cylindrical microphone capsules
* Copyright 2023 Pierre Lecomte - sekisushai@gmail.com
*/
include <threads.scad>;
//$fn=128;
open_sma();
// EDIT BELOW
/*[ Array parameters ]*/
// Last parameter is for support attach.
@@ -24,6 +33,8 @@ neighbors =
[1, 2, 3], // support
];
// DO NOT EDIT BELOW HERE
module attach(id_mic, rmic=3.82, rstud=1.75, color="yellow"){
rtp = [r[id_mic], theta[id_mic], phi[id_mic]];
center = sph2cart(rtp);
@@ -119,13 +130,6 @@ module support(stud=1.75){
}
}
for (i = [0:len(theta)-2]){
attach(i);
studs(i);
};
module studs(id_mic, rstud=1.75){
rtp = [r[id_mic], theta[id_mic], phi[id_mic]];
center = sph2cart(rtp);
@@ -144,4 +148,11 @@ function cart2sph(vec)
= [norm(vec), acos(vec[2]/norm(vec)), atan2(vec[1],vec[0])];
function sph2cart(vec)
= [vec[0]*sin(vec[1])*cos(vec[2]), vec[0]*sin(vec[1])*sin(vec[2]), vec[0]*cos(vec[1])];
= [vec[0]*sin(vec[1])*cos(vec[2]), vec[0]*sin(vec[1])*sin(vec[2]), vec[0]*cos(vec[1])];
module open_sma(){
for (i = [0:len(theta)-2]){
attach(i);
studs(i);
};
};
+21 -9
View File
@@ -1,5 +1,19 @@
include <threads.scad>;
/*
* Rigid SMA design for cylindrical microphone capsules
* Copyright 2023 Pierre Lecomte - sekisushai@gmail.com
*/
include <threads.scad>
/*
The rigid SMA is composed of two hemispherical shells to render separately for 3D printing.
*/
//top_shell_all();
bottom_shell_all();
// EDIT BELOW
/*[ Global parameters ]*/
// Resolution of outter surface (360 for 3D printing)
res = 32;
@@ -49,12 +63,12 @@ hole_phi_offset = 45;
d_hole = 10;
/*
The mic stand threaded hole should be close to the passing cable hole. It's direction is set as an offset from the cable hole direction.abs
The mic stand threaded hole should be close to the passing cable hole. It's direction is set as an offset from the cable hole direction.
*/
// threaded hole offset from cable hole [theta(°), phi(°)]:
dir_thread = [13, 0];
// DO NOT EDIT BELOW HERE
// Hollow sphere
module hollow(r1=r-e, r2=r, fn1=$fn, fn2=$fn){
@@ -77,8 +91,6 @@ square([3.55, 1.1*e]);
}
}
echo(len(theta));
module mics(){
rotate(mics_rotate)
for (i = [0 : len(theta)-1]){
@@ -148,6 +160,9 @@ cylinder(d=d_hole, h=100);
rotate([(angle_min+angle_max)/2 + dir_thread[0],0, hole_phi_offset + dir_thread[1]])
translate([0,0,(r-3*e)])
render()
/*
Change here the type of threaded hole for mounting on a mic stand. See threads.scad file for help
*/
//english_thread(3/8,16,3.5*e/25.4,internal=true);
metric_thread (diameter=6, pitch=1, length=20);
}
@@ -197,7 +212,4 @@ module test_mic(){
torus();
}
}
}
//top_shell_all();
bottom_shell_all();
}